Kenwood KDC-X500 Instruction Manual page 36

Wiring connection
(for
IMPORTANT : We recommend installing the unit with a commercially
available custom wiring harness specific for your car and leave this job
to professionals for your safety. Consult your car audio dealer.
When connecting to an external amplifier, connect its ground wire to
the car's chassis to avoid damaging the unit.
Antenna terminal
To front speaker (left)
To front speaker (right)
To rear speaker (left)
To rear speaker (right)
Ignition switch
Car fuse box
Battery
32
JS_KWD_KDC_X500_KW_EN_00_6.indd 32
)
Rear/ front/ subwoofer output
White
White/Black
Gray
Gray/Black
Green
Green/Black
Purple
Purple/Black
Car fuse box
Red
(Ignition wire)
Yellow
(Battery wire)
Black (Ground wire)
To the metallic body or chassis of the car
Fuse (10 A)
Expansion port (12 V 500 mA)
To the optional SiriusXM Vehicle Tuner (commercially available) ( 12)
If no connections are made, do not let the wire come out from the tab.
Light blue/yellow
(Marine remote control
wire)
Brown
(Mute control wire)
Blue/White
(Power control wire)
Blue
(Antenna control wire)
MIC (Microphone input terminal) ( 15)
To the remote control, KCA-RC55MR
(optional accessory)
USB cable (DC 5 V 1.5 A)
To Kenwood Wired Marine Remote Control unit (optional
accessory)
For the latest information on marine accessories please
go to:
http://www.kenwoodusa.com/Car_Entertainment/
Marine/
To connect the Kenwood navigation system, refer your
navigations manual
To the power control terminal when using the optional
power amplifier
To the antenna control terminal in the vehicle
27/8/2015 3:09:23 PM