Internet Radio Via Bluetooth; Audio Settings - Kenwood KDC-X500 Instruction Manual

BLUETOOTH®

Internet radio via Bluetooth

Listen to Pandora
You can listen to Pandora on the Android device via
Bluetooth on this unit.
Preparation:
Select [ON] for [PANDORA SRC]. ( 5)
1
Open the Pandora application on your device.
2
Connect your Bluetooth audio player via
Bluetooth connection. ( 15)
3
Press repeatedly to select PANDORA.
The source switches and broadcast starts
automatically.
You can operate Pandora in the same way as
Pandora for iPod/iPhone. ( 10)
Listen to iHeartRadio
You can listen to iHeartRadio on the Android device
via Bluetooth on this unit.
Preparation:
Select [ON] for [IHEART SRC]. ( 5)
1 Open the iHeartAuto application on your smart
phone.
2
Connect your smart phone via Bluetooth
connection. ( 15)
3
Press repeatedly to select
IHEARTRADIO.
The source switches and broadcast starts
automatically.
You can operate iHeartRadio in the same way as
iHeartRadio for iPod/iPhone. ( 11)
JS_KWD_KDC_X500_KW_EN_00_8.indd 21

AUDIO SETTINGS

While listening to any source...
1 Press the volume knob to enter [FUNCTION].
2
Turn the volume knob to select [AUDIO CONTROL], then press the knob.
3
Turn the volume knob to select an item (see the following table), then press the knob.
4 Repeat step 3 until the desired item is selected or activated.
5
Press and hold to exit.
(or using RC-406)
Press AUD to enter [AUDIO CONTROL].
1
Press J / K to select an item, then press
2
To return to the previous setting item, press
SUB-W LEVEL –50 to +10 (0): Adjusts the subwoofer output level.
MANUAL EQ
BAND1 LEVEL LEVEL
BASS EXTEND
BAND2 LEVEL to –9 to +9 (0): The sound elements (frequency level, tone level, Q factor) are preset into each
BAND13 LEVEL selection (BAND1 LEVEL to BAND13 LEVEL).
Adjusts the level to memorize for each source. (Before making an adjustment, select the source you
want to adjust.)
Q FACTOR 1.35/ 1.50/ 2.00: Adjust the quality factor.
PRESET EQ NATURAL/ ROCK/ POPS/ EASY/ TOP40/ JAZZ/ POWERFUL/ USER: Selects a preset equalizer
suitable to the music genre. (Select [USER] to use the settings made in [MANUAL EQ].)
BASS BOOST LEVEL1/ LEVEL2/ LEVEL3/ LEVEL4/ LEVEL5: Selects your preferred bass boost level. ; OFF: Cancels.
LOUDNESS LEVEL1/ LEVEL2: Selects your preferred low and high frequencies boost to produce a well-balanced
sound at a low volume level. ; OFF: Cancels.
SUBWOOFER SET ON: Turns on the subwoofer output. ; OFF: Cancels.
FADER R15 to F15 (0): Adjusts the rear and front speaker output balance.
BALANCE L15 to R15 (0): Adjusts the left and right speaker output balance.
.
.
–9 to +9 (0): (Refer to BAND2 LEVEL below.)
ON: Turns on the extended bass. ; OFF: Cancels.
Default: XX
21
ENGLISH
4/9/2015 2:18:28 PM