Long-Distance Control Table - D-Link DVG-5004 Operation Manual

48
When Gateway A enables Inbound Call Control and Gateway B disables Outbound Call Control, then: If
using an extension line at Gateway A to make a local call to a remote end through Gateway B, then dial
Gateway B Number + Local Phone Number
For example: 5168 35020311#
If using a trunk line to dial to Gateway A, and then making a local call to a remote end through Gateway
B, then dial
* Gateway A PIN Code * Gateway B Number Local Phone Number
When the instruction "Enter phone number" is given, then dial
For example: *111111* 5168 35020311# (Gateway A PIN Code: 111111)
If using a trunk line to dial to Gateway A and then to the extension line of Gateway B, dial
* Gateway A PIN Code * Gateway B Number
When the instruction "Enter phone number" is given.
For example: *111111* 5168#
When Gateway A enables Inbound Call Control and Gateway B enables Outbound Call Control, then
If using an extension line at Gateway A to make a phone call to a remote end through Gateway B, then
dial
* Gateway B PIN Code * Gateway B Number Local Phone Number
For example: *123456* 5168 35020311# (Gateway B PIN Code: 123456)
If using a trunk line to dial to Gateway A, and then dialing a local call to a remote site through Gateway B,
please dial
* Gateway A PIN Code * Gateway B PIN Code * Gateway B Number
For example: *111111* 123456* 5168 35020311# (Gateway A PIN Code 111111 Gateway B PIN
Code 123456)

Long-Distance Control Table

This table controls the level of authority of an outgoing call that is dialed through FXO and diverted to
PSTN, as below:
The long-distance control table controls the level of authority of an outgoing call through FXO.
Instruction:
If Level 0 (the highest level) is set to prohibit dialing any number started with prefix 0204, then any
level below 0 (including Levels 1 to 5) is also prohibited.
SIP Operation Manual V2.6
Local Phone Number