Table of Contents
Advertisement
30
LAN interface mode※
Router: The system serves as a router.
Bridge: The system serves as a bridge between WAN port and LAN port.
Network Settings (LAN)
Network Settings (LAN): Gateway LAN Port IP address and the subnet mask value. Please note that
Gateway is built under NAT: Gateway LAN Port IP address cannot be in the same section as the
NAT LAN Port IP address, or else it is unable to make or receive calls. For example, if the NAT
LAN Port IP address is 192.168.8.1, then Gateway LAN Port cannot be ranged between 192.168.8.1
~ 192.168.8.254. If so, please change the LAN port IP address, (e.g. setting the IP address to
192.168.99.254.)
SIP Operation Manual V2.6
Advertisement
Table of Contents
