D-Link DVG-5004 Operation Manual page 44

Table of Contents

Advertisement

38
Client Settings
Register to Phone Book Manager: To register to the Phone Book Manager. If the Gateway is Phone
Manager Server, it has to enable this function to communicate with other clients.
Gateway Name for Phone Book Manager: The alias registered with the Phone Book Manager
Server.
Phone Books Manager IP/Domain: Enter the IP address for the Phone Book Manager Server. It
supports URL (Uniform Resource Locator).
Phone Book Manager Server Listen Port: The protocol communication port for transmitting signals
between the Phone Books Manager and other Gateway systems. Please confirm whether the
setting is the same as that for the Phone Book Manager Server.
Enable Phone Book Manager Tunnel: Check it to make a call through private tunnel.
Behind Symmetric NAT: Check it if the VoIP gateway is built under NAT.
Phone Book Manager Login Password: Enter the registered password. If this system is serving as
the Phone Books Manager, the set password is also the password used for registering other Gateway
systems.
Note: If the NAT type of your router is Restricted Cone, Port Restricted Cone and Symmetric, please
use STUN to decrease the loading of Phone Book Manager, and the group is able to loading
more calls.
The bandwidth of different Codec needing:
G.711
20ms
171.2
30ms
156.8
60ms
142.4
SIP Operation Manual V2.6
G.729a
G.723.1
59.2
N/A
44.8
41.6
30.4
27.2

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dvg-6004

Table of Contents