Software Installation - CEL Robox Quick Start Manual

Software Installation

This section explains in detail how to install the AutoMaker™ software package for
controlling your Robox®. The included USB card drive contains this software and
an electronic version of this document, as well as some sample .stl files for you to
print.
These steps may vary slightly depending on your operating system, all provided
screenshots and instructions are from Windows 8 for reference.
1. Plug your included USB drive into an
available USB port (drive letter may vary)
- choose Open folder to view files:
If this is not displayed, you can access the
drive through My Computer.
2. The contents of the drive will be
displayed in File Explorer as shown
(view mode may vary).
3. Navigate to \AutoMaker Software\
Windows and run the installer
by double-clicking on the icon -
AutoMaker-windows-installer.exe
4. Select the installation language from the
dropdown menu, and then click OK to
continue.
www.cel-robox.com
Installing AutoMaker™
7