Power-Saving Tips - Mio DigiWalker A701 User Manual

USB
You can establish a synchronization partnership between A701 and the desktop
computer (ActiveSync mode), or simply use A701 as a card reader (Card
Reader mode). The default setting is
to disable the USB connection in ActiveSync on the desktop computer when
using the card reader mode.
Camera
When you use the camera indoors, you can select
flicker frequency of the fluorescent lamp.

Power-Saving Tips

Follow these suggestions to maximize the battery's operating time, particularly
when you are relying solely on the battery power for extended time periods.
Suspend or turn off the device frequently.
By default, the screen backlight will automatically turn off and A701 will
also suspend when it has been idle for a period of time. You can shorten the
length of the idle time using
to set up.
Press the
Power off
tap
time.
Turn off functions not needed or adjust settings.
Lower the volume.
Do not enable sounds or light flashing except for the most necessary
notifications. Tap
set up.
Remove the SD/MMC card, if installed, from the slot if you are not
using it.
Managing Your A701
End button for 3 seconds until the Quick List appears and then
to turn off your A701 when it is not in use, even for a short
ActiveSync mode
50Hz
Settings
Settings Personal
. Note that you do not need
60Hz
or to match the
System Power
Sounds & Notifications
Advanced
to
4-3