Entering The Suspend Mode - Mio DigiWalker A701 User Manual

Entering the Suspend Mode

By default, your A701 will automatically suspend after 1 minute of inactivity
when operating on battery power. You can press the
A701.
A701 will not automatically suspend when it is connected to AC power for
charging or to the desktop computer for synchronization. To make A701 enter
the suspend mode, press and hold the
Quick List appears, and then tap
In the suspend mode, if a SIM card is inserted, the charge indicator will flash in
green, indicating that A701 is inside the mobile phone network. A701 will
automatically resume upon an incoming call, and ring (or vibrate, depending on
your setting) and display the caller's phone number and name on the screen.
To avoid waking up A701 from the suspend mode, you can enable the keypad
auto-lock function by tapping
Auto lock when device turns off
and selecting
To change these settings, tap
Getting Started
End button for 3 seconds until the
Sleep
.
Settings System
.
Settings System
End button to resume
Power Advanced
Power
.
1-10