Sliding Latch Plate And Alr Retractor - Graco Extend2Fit Instruction Manual

Sliding Latch Plate and ALR
Retractor
tal
A latchplate that slides freely on the belt
t
webbing and cannot, by itself, hold the belt
snug around a car seat.
Slowly pull the shoulder belt all the way
out. Route the vehicle seat belt through the
proper belt path and buckle it in. Then, as
ets
you pull the vehicle seat belt tight, feed all
the slack back into the retractor.
d
Grab the sides of the seat at the belt path and
.
slide the seat side-to-side and front-to-back.
The seat should not move more than 1 inch
(2.5 cm).
83