Variation Correction - Color Balance - Minolta DiMAGE H-A106 Instruction Manual

Variation Correction – Color Balance:
If you selected the "Color Balance" variation option, showing the "Current" image in the center, six other
simulation images are displayed for "Red (R)", "Magenta (M)", "Blue (B)", "Cyan (C)", "Green (G)" and
"Yellow (Y)", where each simulation image has been corrected by one level up to the "Current" image.
If you click one desired simulation image, newly simulated images are displayed by replacing the current
image with the selected simulation image.
If you drag the control of the "Adjust Correction Level" slide bar with the mouse, you can change the
degree of the correction by one level from the initial value (10) to another within the range of 1 through 20.
If you check the "Display Limit" checkbox, parts of simulation images that exceeded their display limits (0
or 255) will be reversed when you correct each color balance for "Red (R)", "Magenta (M)", "Blue (B)", "Cyan
(C)", "Green (G)" and "Yellow (Y)".
You can cancel all kinds of correction performed in the "Color Balance" variation by clicking "Reset". The
current image in the center and six simulation images will return to the status when this "Variation" window
appeared for the first time.
"Adjust Correction Level" slide bar
"Display Limit" checkbox
- 53 -
COLOR CORRECTION