Table of Contents
Advertisement
Color-balance variation
Six images with a slight color correction are displayed around a thumbnail of the original image. For
more about color, see page 38.
Drag the variation-step slide bar, or enter the correc-
tion level into the text box to set the degree of correc-
tion.
• The initial setting is 10. The correction step can be
set between 1 and 20.
• Checking the display-limit check box will indicate
when any of the image values exceed 0 (black limit)
or 255 (white limit) with the complementary color.
For example, if the blue area of the image exceeds
those values, the limit is displayed with the
complementary color, yellow.
Click the best image among the six frames.
• The selected image becomes the new center
surrounded by six new images corrected by the
designated step. This procedure can be repeated
until the desired correction is obtained.
• Click the reset button to cancel any changes.
Click the close button to close the palette and apply
any image corrections.
Variation-step slider and text box
Display-limit check box
Close button
Reset button
33
Advertisement
Table of Contents
