Table of Contents
Advertisement
SHARPNESS
If you click the "Sharpness" tab, the following sharpness correction window appears. You can set the
frequency to be emphasized or the degree to be emphasized while checking those effects on the preview
image.
1. Drag the "Frequency to be" slide bar control with the mouse to select the
frequency that you wish to emphasize the sharpness.
You can not set the control between graduations.
2. Drag the "Degree to be" slide bar control with the mouse to select the degree
that you wish to emphasize the sharpness. Or type the value directly in the
right-hand box.
You can not set the control between graduations (only in the case of Windows
You can set the value by "0.1" at a time within the range of 0.0 through 2.0.
The slide bar control is linked to the value in the box. If you change either one, the other value (location)
is also changed correspondingly.
- 64 -
®
).
Advertisement
Table of Contents
