Corrections Using The Tone Curves - Minolta DiMAGE H-A106 Instruction Manual

Corrections using the tone curves

1. Click the "Tone Curves/Histogram Correction" button.
The "Tone Curves and Histogram" window (figure-below) appears.
2. Select the desired tone curve channel
to correct from the "Channel" drop-
down list.
If you select the "RGB" channel, each color will be
corrected based on the same ratio. If you select "R",
"G" or "B", you can correct each color separately.
You can also select the channel from your keyboard
(shortcut).
"Ctrl" ("Command" for Macintosh) key + 0 (zero)
"Ctrl" ("Command" for Macintosh) key + 1
"Ctrl" ("Command" for Macintosh) key + 2
"Ctrl" ("Command" for Macintosh) key + 3
3. Move the mouse cursor over the tone
curve, and then drag it to the location
where you wish to make corrections.
The tone curve correction result will be reflected in
the preview image in the corrected image display
area.
- 41 -
COLOR CORRECTION
RGB
R
G
B