1
Open the battery compartment at the
back of the unit.
2
Insert four R14/UM-2/C size batteries
(not supplied) with correct polarity
(+/-) as indicated, then close the battery
compartment.
» The unit is ready to operate.
Caution
•
A 'Battery low' message is shown when the battery
power is low. Replace batteries or connect to AC
power to ensure normal operation.
Note
•
Batteries contain chemical substances, so they should
be disposed of properly.
Turn on
•
Press
to turn on the radio.
» The radio switches to the last selected
source.
» For first-time use, the unit shows a
welcome message and switches to
DAB mode to start automatic scanning
for available DAB stations.
•
Press
again to switch the radio to
standby mode.
» The clock and date information (if set)
displays on the panel.
EN
8