[Pin]: select this option if your wireless
•
router supports WPS and PIN setup
method. The radio generates an 8-digit
code number that you can enter into
the router.
[Skip WPS]: select this option if your
•
wireless router does not support WPS.
You are prompted to enter the key for
your Wi-Fi network.
12
As instructed on the display panel, press
WPS button or enter the pin on your
wireless router, or enter the key to connect
to your network (The options displayed
depend on the type of your network and
network protection used).
•
When entering the key of the network,
to select a character, press
, then press OK to confirm.
Key:
0123456789._-@,
0
BKSP
abcdefghijklmn
OK
opqrstuvwxyz
ABC
DEFGHIJKLMNOPQR
CANCEL
•
To cancel, press
[CANCEL].
•
To confirm your entry, press
/
to select[OK].
•
To delete the entry, press
to select [BKSP].
•
To exit the process, press .
» If the network connection is
established, [Connected] is displayed.
13
When [Setup wizard completed] appears,
press OK to exit the setting.
Setup wizard
Setup wizard
completed
Press `OK to exit
Tip
•
For some Wi-Fi routers, you may need to hold the
WPS button for Wi-Fi connection. See the user manuals
of the specific routers for details.
•
To run the setup wizard again, select [System
settings]>[Setup wizard] menu (see the Chapter "Use
system settings menu").
/
/
/
/
/
/
to select
/
/
/
/
/
Turn on
•
Press .
» The radio switches to the last selected
source.
Switch to standby mode
•
Press
again.
» The display panel is dimmed.
» The time and date (if set) are
displayed.
Note
•
If the system is idle for 15 minutes, the radio switches
to standby mode automatically.
EN
9