Use System Menu In Fm/Dab Mode - Philips AE5600 User Manual

3
Press + TUNING - repeatedly to select a
preset number, then press SCAN/SELECT
to confirm and save the station to the
corresponding preset number.
4
Repeat steps 1 to 3 to store more favorite
FM stations.
Note
•
To remove a preset FM radio station, store another
station in its place.
•
At the above step 2, you can also press and hold a
numeric key (1 -3) to save the station as one of your
favorite three preset stations.
Select a preset FM radio station
1
In FM mode, press PRESET to enter the
preset selection menu.
2
Press + TUNING - to select a preset
number.
3
Press SCAN/SELECT to confirm.
To select one of your favorite
three preset FM stations:
Press the numeric key 1 - 3 directly.
•
Use FM menu
1
In FM mode, press and hold INFO/MENU
to access the FM menu.
2
Press TUNING +/- to scroll the menu
options:
• [Scan setting]
• [Stereo setting]
• [System] (see 'Use DAB
menu' on page 9)
3
To select an option, press SCAN/SELECT.
4
Repeat steps 2-3 if any sub-option is
available under an option.
Scan setting
• [All stations]: scan all the available
radio stations.
• [Strong station]: scan stations
with strong signals only.
Stereo setting
• [Stereo allowed]: select stereo
broadcast.
• [Forced mono]: select
mono broadcast.
Show RDS information
RDS (Radio Data System) is a
service that allows FM stations to
show additional information.
If you listen to an FM station with RDS signal, a
RDS icon and the station name are displayed.
1
Tune to a RDS station.
2
Press INFO/MENU repeatedly to scroll
through the following information (if
available):
» Station freq (No name)
» Stereo/MONO
» TIME
» DATE
Use system menu in FM/DAB
mode
Reset all the settings
1
In DAB/FM mode, press and hold
INFO/MENU.
2
Press TUNING +/- until [System]
(system)is displayed.
3
Press SCAN/SELECT to confirm.
» [Factory Reset] (factory reset) is
displayed.
EN 11