Trip Computer Menu - Mercedes-Benz 2016 Sprinter Operator's Manual

On-board computer (vehicles with steering wheel buttons)
174
This function pertains to the
(instrument cluster) menu, the
and the Vehicle
Using the steering wheel buttons
Press the V or U button repeatedly
X
until the Settings
play.
Press the 9 button to switch to the sub-
X
menu selection.
Press the W or X button to select the
X
Convenience
Press the 9 button to select the
X
tion.
The selection marker is on the current setting.
Press the W or X button to activate or
X
deactivate key dependency.

Trip computer menu

General notes
You can call up or reset statistical data for the
vehicle in the Trip computer menu.
i
When you call up the trip computer again, it
displays the last function called up.
The units of the statistical information dis-
played are set permanently for each specific
country, and are therefore independent of the
units selected in the
Trip computer "After start" or "After
reset"
Example: "After start" trip computer
Distance
:
Time
;
Average speed
=
Average fuel consumption
?
Inst. cluster
Lighting
menu.
menu appears in the dis-
submenu.
Key
Settings menu.
Using the steering wheel buttons
menu
Press the V or U button to select
X
After start.
or
Press the 9 or : button to select
X
After reset.
The values in the
the start of the journey. The values in the
reset submenu refer to the last reset of the trip
computer.
The After start
func-
automatically reset if:
the ignition has been switched off for more
R
than 4 hours.
999 hours have been exceeded.
R
9,999 miles have been exceeded.
R
The After reset
reset if the value exceeds 9,999 hours or
99,999 miles.
i
If you turn the key to position 0 in the igni-
tion lock or remove it, all the values are reset
after approximately four hours.
The values will not be reset if you turn the key
back to position 1 or 2 during this time.
Calling up the range
Using the steering wheel buttons
Press the V or U button to select
X
After start.
Press the 9 or : button to select
X
Range.
The approximate distance which can be cov-
ered with the tank's current contents and
your current style of driving is shown.
i
If there is only a small amount of fuel left in
the fuel tank, the 7
sage is shown instead of the range.
Resetting the trip computer
Using the steering wheel buttons
Press the V or U button to select
X
After start.
Press the 9 or : button to select the
X
function you would like to reset.
Press and hold the 9 reset button until the
X
values are reset to "0".
After start submenu refer to
trip computer function is
trip computer is automatically
Please refuel
After
mes-