Battery Installation & Charging - AT&T E5865 User Manual

ATT-5865CIB-d5.qxd 1/3/2004
Getting Started
Battery installation & charging
After installation, place the handset in the base and allow batteries to charge for 12
hours before use. You can keep batteries charged by returning the handset to the base
after each use. When battery power is fully depleted, a full recharge takes about 8 hours.
Press coin into slot on
base of handset to
release latch, then
remove battery cover
To replace battery cover
Insert top
tab first
11:23 AM Page 7
Press down to
click in place
DID YOU KNOW?
DID YOU KNOW?
Optional spare batteries can be kept charged in
Optional spare batteries can be kept charged in
the base, for quick replacement when handset
the base, for quick replacement when handset
batteries become depleted (see page 47).
batteries become depleted (see page47
7
1
LOW BATTERY
REDIAL CID LOG
2:10 PM
Low battery indicator
Return handset to base to recharge
when this symbol flashes. (Handset
will beep when battery is low.)
Insert supplied
batteries
Caution: Use only AT&T 2AA
NiCad or NiMH rechargeable
batteries. Do not use AA
alkaline batteries.
Place handset in base to charge
for 12 hours before first use.
Rotate antenna to fully upright
position