Time Setting; Setting The Temperatures; Programming - Gabarron CTP10 User Manual

Time Setting

Turn the knob to .
The days flash.
Press + or - to make your
choice, OK to confirm it and go
to the next setting.
Repeat the operations to set
the hours and minutes.
Turn the knob to exit the setting mode.
Setting the temperatures (set-points)
Turn the knob to:
- to set the frost protection
temperature (5°C to 15°C, 7°C
by default),
- to set the economy
temperature (10°C to 30°C,
15°C by default),
- to set the comfort temperature (10°C to 30°C,
66.20°F by default),
Press + or - to make your choice.
Turn the knob to exit the setting mode.
Day
Hours
Minutes
- 30 -

Programming

When starting up, the "Comfort mode from 6am to
11pm" program is applied to all the days of the week.
To change the programming,
turn the knob to PROG.
The 1 st time slot flashes on and off.
Time slot
consulted
st
1 time
slot
Economy mode
for 1 hour
Comfort
for 1 hour
Quick programming:
To apply the same program to the following day, press
and hold the OK button for approximately 3 seconds
until the program of the following day is displayed.
Turn the knob to exit the programming mode.
Day
Program
profile
Go to the next
Confirm and go
program change
to the next day
- 31 -