Location; Mountings - Gabarron CTP10 User Manual

Location

As the temperature measuring probe is in the unit, you
must install the thermostat flush-mounted box:
- on an accessible wall at a height of 1.50 m,
- away from heat sources (fireplaces, sunlight) and
draughts (windows, doors),
IMPORTANT: Do not install the thermostat on a wall
in contact with the outside or in an unheated room
(e.g. garage, etc.).
The sleeve output in the recess mounting box must
be plugged (mastic) in order to avoid unwanted air
movements that would distort the probe measurement.
approx 1.50 m
min. 20 cm
- 22 -

Mountings

Lift off the cover by using
a screwdriver.
Remove the batteries supplied
with the unit (using the
screwdriver).
Connect the control wires (see next section) then place
the thermostat on the wall.
Secure it using the
screws and pegs or fit
2
onto a flush-mounted
box (➊, distance
2
between centres
60 mm).
Partitions (➋) that can be removed by pliers
are provided for passing the connection
wires if required.
Fit the batteries back, ensuring that they
are correctly fitted.
- 23 -
AUTO
PRO PROG