Return To The Initial Settings - Gabarron CTP10 User Manual

CF04 - Circulator anti-seizing
Circulator anti-seizing
Press + or - to make your choice, OK to confirm it and
go to the next menu.
CF05 - Relay status after
3 months of battery fault
Relay status after
3 months of battery fault
Press + or - to make your choice, OK to confirm it and
go to the next menu.
Turn the knob to exit the configuration mode.
No anti-seizing
Anti-seizing enabled (start up
1 minute after 24 hours shutdown)
Open (OFF)
Closed (ON)
Operates until battery is completely
flat (random relay status).
- 28 -

Return to the initial settings

You can carry out a general reset to return to the factory
settings:
- the installer settings (grayed out on the start up
menus)
- the time and day,
- set-point temperatures,
- default program.
Turn the knob to Shutdown then
press the left-hand button for
10 seconds until init is displayed.
Press OK to confirm or C to
cancel.
Return to the shutdown mode
display.
10 sec.
- 29 -