Power Your Radio; Operating Your Radio - Fm - Sangean SG-118 Operating Instructio

Power your radio

AC operation
Before you plug the AC cord into the radio, be sure the AC voltage is correct. Insert the plug on the
end of the supplied power cord into the AC power socket on the back of the radio.
DC operation
For outdoor use, you can power the radio by using a 12V DC input socket from a DC power supply (not
included) (example, from the power supply of vehicles or boats). An AC power adaptor with 1 Ampere
and center positive in polarity can also power the radio in house.
Operating your radio FM
1.
Connect the Antenna
The radio comes with a built-in AM / FM antenna. To improve FM reception, insert the end of the
supplied FM wire antenna into the F-type antenna terminal and adjust the wire for best reception.
A 75 ohm coaxial cable to an outdoor antenna may also be attached to the terminal. Be sure to
switch external / internal antenna switch to external position while using the supplied wire anten-
na or connected to an outdoor antenna. In some European countries, you may have to connect
the supplied antenna terminal adaptor (EU Version Only) to connect with an outdoor antenna.
2.
Turn on your radio by rotating the Power knob to the FM position.
3.
Rotate the Tuning Control knob to select the desired station. On FM, the tuning scale is marked in
MHz (Megahertz). The tuning LED indicator will appear brightest when the best tuning has been
achieved.
4.
Adjust the Volume Control knob for comfortable listening.
5.
To switch off the radio,turn the Power knob to the OFF position.
07