Sony SRS-Z500 Service Manual page 3

Stereo active speaker system

Hide thumbs Also See for SRS-Z500:

SRS-Z500/Z500PC

2-1. SCHEMATIC DIAGRAM

Note on Schematic Diagram:

• All capacitors are in µF unless otherwise noted. pF: µµF

50 WV or less are not indicated except for electrolytics

and tantalums.

• All resistors are in Ω and

W or less unless otherwise

specified.

•

: indicates tolerance.

• C : panel designation.

• U : B+ Line.

SECTION 2

DIAGRAMS

• Power voltage is dc 9 V and fed with regulated dc power supply

from external power voltage jack.

• Voltages and waveforms are dc with respect to ground under no-

signal (detuned) conditions.

• Voltages are taken with a VOM (Input impedance 10 MΩ).

Voltage variations may be noted due to normal production toler-

ances.

• Signal path.

: AUDIO

— 3 —

204GD

— 4 —

Table of Contents

Srs-z500pc