LEGACY Control System operations–overview
Strobe Light
Y
our locomotive is equipped with a Strobe Light that can be controlled in the Legacy
environment by following the steps listed below.
1. Follow the instructions included with your locomotive's memory module for downloading
all of the features for your locomotive to the Legacy system.
2. Address your locomotive by pressing ENG, 1 and the START-UP icon.
After pressing the START-UP icon, the touch screen will change to the control panel
Note!
shown below.
3. Use the Strobe Light icons shown below to activate or de-activate the Strobe Light.
Strobe ON
11
Strobe OFF