Installing The Fire Pit; Operation; Use As Fire Pit - tepro GLADSTONE Instruction Manual

t

Installing the fire pit

• Before use, place the fire pit on a flat,
stable surface outdoors�

Operation

Danger Risk of burning!
The fire pit and the firewood
located inside it become very
hot during operation, such
that any contact with these
can lead to very severe burns�
– Keep away from hot parts as any
contact can cause severe burns�
Always wear heat-resistant barbecue
or kitchen gloves�
– Use only long-handled utensils with
heat-resistant grips�
– Do not wear any clothing with wide
sleeves�
– Use only dry lighters or special fluid
lighters compliant with EN 1860-3 as
firelighters�
18

Use as fire pit

1� Remove the spark screen (c) from the
fire bowl (B)�
2� Place 1-2 solid firelighters in the middle
of the fire pit on the charcoal grate (E)�
Pay attention to the manufacturer's
instructions on the packaging� Light
the firelighters with a match�
3� Layer a few pieces of dry, seasoned
firewood as kindling in the form of a
pyramid around the firelighters�
4� Wait until a sufficiently large flame has
developed on the kindling before you
lay on more pieces of wood� Place the
spark screen (c) on the fire bowl (B)
in order to avoid flying sparks� Use the
poker (E) for stoking the fire�
5� WARNING! Bear in mind that the fire
bowl becomes very hot� You should
therefore touch the fire bowl only while
wearing oven gloves�