Recognition) - GMC 2011 Terrain Owner's Manual

Bluetooth (Voice

Recognition)

Pairing
A Bluetooth cell phone must be
paired to the Bluetooth system and
then connected to the vehicle before
it can be used. See the cell phone
manufacturer's user guide for
Bluetooth functions before pairing
the cell phone. If a Bluetooth phone
is not connected, calls will be made
®
using OnStar Hands Free Calling,
if available. Refer to the OnStar
owner's guide for more information.
The pairing process can be started
by using the voice recognition
system or the controls on the
infotainment system.
Pairing Information:
Up to five cell phones can be
paired to the Bluetooth system.
The pairing process is disabled
when the vehicle is moving.
The Bluetooth system links with
the first available paired cell
phone in the order the phone
was paired.
Only one paired cell phone can
be connected to the Bluetooth
system at a time.
Pairing only needs to be
completed once, unless the
pairing information changes or
the phone is deleted.
To link to a different paired phone,
see Linking to a Different Phone
later in this section.
Pairing a Phone
1. Press / .
For vehicles without a
navigation system, the
system responds Ready,
followed by a tone.
For vehicles with a
navigation system, the
system responds with a
tone. After the tone say
Infotainment System
Hands Free. The system
responds Ready, followed
by a tone.
2. Say Bluetooth. The system
responds Bluetooth ready,
followed by a tone.
3. Say Pair. The system responds
with instructions and a four digit
Personal Identification Number
(PIN). The PIN will be used in
Step 4.
4. Start the pairing process on the
cell phone that will be paired to
the vehicle. Reference the cell
phone manufacturer's user guide
for information on this process.
Locate the device named Your
Vehicle in the list on the cell
phone and follow the instructions
on the cell phone to enter the
four digit PIN number that was
provided in Step 3.
7-51