Cruise Control - GMC 2011 Terrain Owner's Manual

9-42 Driving and Operating
When this message is displayed
and/or comes on and stays
on, the vehicle is safe to drive
but the system is not operational.
Driving should be adjusted
accordingly. See Ride Control
System Messages on page 5 27.
If comes on and stays on, reset
the system by:
1. Stopping the vehicle.
2. Turning the engine off and
waiting 15 seconds.
3. Starting the engine.
If still comes on and stays on at a
speed above 20 km/h (13 mph), see
your dealer for service.
g
is located on the console.
Both StabiliTrak and Traction
Control can be turned off if
needed by pressing and
g g
holding until and
on the instrument panel. When
StabiliTrak is turned off, the system
will not assist with directional
control of the vehicle or limit
wheel spin. Driving should be
adjusted accordingly. Press and
g
release again to turn the system
back on.
If cruise control is being used when
StabiliTrak activates, the cruise
control will automatically disengage.
Press the cruise control button to
re engage when road conditions
allow. See Cruise Control on
page 9 42 for more information.

Cruise Control

With cruise control, the vehicle can
maintain a speed of about 40 km/h
(25 mph) or more without keeping
your foot on the accelerator. Cruise
control does not work at speeds
below 40 km/h (25 mph).
If the brakes are applied, the cruise
control is disengaged.
If the vehicle has the StabiliTrak
come
system and begins to limit wheel
spin while using cruise control,
the cruise control automatically
disengages. See StabiliTrak
System on page 9 41 or Traction
Control System (TCS) on
page 9 39. When road conditions
allow you to safely use it again,
the cruise control can be turned
back on.
®
®