Oldsmobile cutlass supreme 1996 Owner's Manual page 90

I
Resuming a Set Speed
Increasing Speed While Using Cruise Control
Suppose,you set your cruise control at a desired speed There are two ways to go to a higher speed:
and then you the brake*
Of
shuts
Off
I
0
Use the accelerator pedal to get to the higher speed.
the cruise control. But you don't need to reset it.
Push in the SET button, then release the button
Once you're going about
25 mph (40 k m / h ) or
more, you can move
the cruise control
switch from ON to
R/A (Resume/Accelerate)
for about half a second.
You'll go right back up
to your chosen speed and
stay there.
and the accelerator pedal. You'll now cruise at the
higher speed.
Move the cruise switch from ON to WA. Hold it
there until you get up to the speed you want, and
then release the switch. (To increase your speed
in very small amounts, move the switch to R/A for
less than half a second and then release it. Each
time you do this, your vehicle will go 1 mph
(1.6 k m / h ) faster.)
The accelerate feature will only work after you set the
cruise control speed by pushing the SET button.