Wheel Alignment And Tire Balance - Oldsmobile cutlass supreme 1996 Owner's Manual

Table of Contents

Advertisement

Traction --,A, B, C
The traction grades, from highest to lowest, are A, B,
and C , and they represent the tire's ability to stop on wet
pavement as measured under controlled conditions
'
on specified government test surfaces of asphalt
and concrete. A tire marked C may have poor
traction performance.
Warning: The traction grade assigned to this tire is based
on braking (straightahead) traction tests and does not
include cornering (turning) traction.
Temperature
--
A, B, C
The temperature grades are A (the highest), B, and C ,
heat and its ability to dissipate heat when tested under
controlled conditions on a specified indoor laboratory
test wheel. Sustained high temperature can cause the
material of the tire to degenerate and reduce tire life, and
excessive temperature can lead to sudden tire failure.
The grade C corresponds to a level of performance
which all passenger car tires must meet under the
Federal Motor Vehicle Safety Standard No. 109. Grades
B and A represent higher levels of performance on the
laboratory test wheel than the rriinimum required by law.
.
representing the tire's resistance to the generation of
Warning: The temperature grade for this tire is
established for a tire that is properly inflated and not
overloaded. Excessive speed, underinflation, or
excessive loading, either separately or in combination,
can cause heat buildup and possible tire failure.
Wheel Alignment and Tire Balance
The wheels on your vehicle were aligned and balanced
carefully at the factory to give you the longest tire life
and best overall Performance.
In most cases, you will not.need to have your wheels
aligned again. However, if you notice unusual tire wear
or your vehicle pulling one way or the other, the
alignment may need to be reset. If you notice your
vehicle vibrating when driving on a smooth road, your
wheels may need to be rebalanced.
6-47

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents