Deleting An Alert - Nokia E61 User Manual

Marketstream User Guide for Nokia E61
• You can either set a greater than or less than condition for the alert on an instrument.
• Press
to scroll down to 'Value' and set the price for the alert to trigger using the keypad. This must be a
numeric value and no currency symbol is required.
• Then press
on 'Options' and select 'Submit'.
• The alert will now be added to the system and will appear on the 'Alert Summary' screen.
Editing an alert
• To edit the details of an existing alert:
• Got to the alert you want to edit from the 'Alert Summary' page
• Press
on 'Options', scroll down and select 'Edit'.
• Modify the details as required following the steps given above under 'Adding Alerts' section.
• After editing is complete press
• An edited alert is automatically reset (made active) if it was previously triggered.
Resetting an alert:
• Resetting an alert that has already triggered allows it to be triggered again the next time the same
conditions are matched. To reset an alert:
• Got to the alert you want to reset from the 'Alert Summary' page.
• Press
on 'Options', scroll down and select 'Reset'.
• The alert will now be reset. If the conditions are still met then the alert will trigger immediately.

Deleting an alert:

• On the 'Alert Summary' page go to the alert you want to delete.
• Press
on 'Options', scroll down and select 'Delete'.
When an alert is triggered a flashing message will appear on the screen, and an alarm will sound. Here you can
select 'View Alerts' to go to the alert screen or select 'Back' to return to the screen you were viewing when the
alert occurred.
If an alert is triggered while you are not using the application, or while you are out of signal coverage, the alert
will trigger as soon as the mobile device regains the server connection (i.e. as soon as you log in again, or the
mobile signal is regained).
Setup
The Setup screen shows your username and password currently stored in the device to log into the
MarketStream Application.
on 'Options' and select 'Submit'.
7