Table of Contents
Advertisement
Assembly & Set-up (continued)
2. Attach the handle inserting the pins on each side and
install the cotter pins with the washer placed beneath,
then bend as shown to secure in place.
3. Attach the upper handle section to the lower handle
section using the bolts and knobs. Fasten the
corrugated tubing (which covers the throttle and
engine stop cables) to the handles using the tie
straps included.
NOTE: the throttle control (Honda engine) and engine
stop lever adjuster must be on the right side from the
operator position.
4. Verify that the engine stop lever is installed and it
pivots upward completely against the handle.
California Trimmer • 1028 4
HOVER MOWER OPERATOR'S MANUAL
th
St. SW, Bldg. A • Auburn, Washington 98001 • CalTrimmer.com
Key Components
The image below identifies key components of the
California Trimmer Hover Mower so take the time to
familiarize yourself with them and their function.
RC190-BS550
RC190-GCV160
Page 3
Advertisement
Table of Contents
