Toyota 2006 Hilux Mk6 Owner's Manual page 51

D
Push and pull the child restraint
system in different directions to be
sure it is secure. Follow all the
installation instructions provided by
its manufacturer.
13H092
3. To remove the baby (infant) seat, press
the buckle release button and allow the
belt to retract completely. The belt will
move freely again and be ready to
work for an adult or older child passen-
ger.
CAUTION
Always remove the locking clip when
the child restraint system
installed.
13h074
(B) CHILD (CONVERTIBLE)
INSTALLATION
A child (convertible) seat must be used
in forward- facing or rear- facing posi-
tion depending on the age and size of
the child. When installing, follow the
manufacturer's instruction about the ap-
propriate age and size of the child as
well as directions for
child restraint system.
is not
An ELR (Emergency Locking Retractor)
belt requires a locking clip to install a
child restraint system.
SEAT
installing the
35