Removing Nozzle, Contact Tip, And Adapter, Changing Liner, And Cleaning Gun Casing - Hobart H200L4-15 Owner's Manual

7-8. Removing Nozzle, Contact Tip, And Adapter, Changing Liner, And Cleaning Gun
Casing
2
1
7/16 in
Remove nozzle,
contact tip, and
adapter.
Stickout
Tools Needed:
5/8, 7/16 in.
3
4
Head
Tube
5/8 in
Blow out
gun casing.
3/4 in.
(20 mm)
Liner
.
A complete Parts List is available on-line at www.HobartWelders.com
Cut off wire and
disconnect gun
from feeder.
Lay gun cable out
straight before
installing new liner.
Reassemble gun in
reverse order from
taking it apart.
!
Turn off welding power
source/wire feeder.
1 Nozzle
2 Contact Tip
3 Tip Adapter
4 Nozzle Adapter
.
Wire size stamped on tip −
check and match wire size.
Unscrew and
remove liner.
Install
Liner
.
Thread wire according to
welding power source/wire
feeder manual.
242 207-A
OM-235 281 Page 25