–or–
5 ) to confirm your selection.
SYSTEM SCAN
System Scan scans trunked talkgroups and
conventional channels between LTR and
conventional zones, as programmed by your
dealer. Up to 16 different talkgroups or
conventional channels can be programmed
into each Scan list. You can edit these lists
through your radio's menu (see page 37).
When System Scan is enabled:
•
The G symbol appears on the LCD
screen.
•
The LED indicator blinks green during
System Scan operation; it stops blinking
when the radio switches to an active
talkgroup or channel.
Note:
36
English
All Group Off?
G
If you enter menu mode while the radio is
scanning, scanning stops. It resumes when
you exit menu mode.
To start or stop a System Scan operation:
Press the preprogrammed System Scan
button (see page 12) to start or stop scanning,
–or–
Do the following:
1 ) to enter menu mode.
2 + or ? until
3 ) to select
You see the current scan status.
4 + or ? until
–or–
5 ) to confirm your selection.
System Scan
System Scan
Sys Scan On?
Sys Scan Off?