I Hailer Operation - Icom IC-M604 Instruction Manual

7
OTHER FUNCTIONS
t After releasing [PTT] you can hear the response through
the speaker.
y To return to normal operation, push [CLR] or repeat step
q.
• While in the intercom mode, the transceiver functions
(transmit and receive) are interrupted. If the transceiver
is in transmit condition, the intercom function is not avail-
able.
• When a DSC call is received, the intercom function is in-
terrupted with an automatic return to the transceiver
mode. The transceiver's display indicates 'Receiving DSC
calls.' (p. 32)
• When a WX alert is received, "W W X X A A L L E E R R T T " blinks and a
beep sounds. The WX alert sounds after the Intercom
use is finished.
40

I Hailer operation

The IC-M604 has a 2-way hailer function for voice amplifica-
tion and reception over a loudspeaker, making it unnecessary
to leave the bridge to hear a hailing party. During hailer oper-
ation, transmitting is impossible and the received signal is
muted.
Connect an external hailer speaker as described on p. 46.
q Push [F], then push [7•
HAIL
Push ,
HAILER HAILER
then push
LISTEN LISTEN
15 15
w Push and hold [PTT] and speak at a normal voice level
into the microphone.
• "T T A A L L K K " or "L L I I S S T T E E N N " appears on the caller or listener function
display, respectivery.
• To adjust the hailer level, rotate [SELECTOR].
e After releasing [PTT] you can hear the response through
the speaker.
r To return to normal operation, push [CLR] or repeat step q.
• While in the hailer mode, the transceiver functions (trans-
mit and receive) are interrupted. If the transceiver is in
transmit condition, the hailer function is not available.
• When a DSC call is received, the hailer function is inter-
rupted with an automatic return to the transceiver mode. The
transceiver's display indicates 'Receiving DSC calls.' (p 32)
] to enter hailer mode.