Icom IC-M604 Instruction Manual page 51

--Set Mode--
Foghorn Frequency Frequency
˘400
350
300
250
<CLR <CLR˘Exit / ENT ENT˘OK>
D D Radio power
(Appears when a COMMANDMIC™ is connected)
This item sets the Radio power function ON or OFF.
ON : The transceiver's power is controlled by the optional
command microphone. When the command micro-
phone is turned OFF, the transceiver will also be turned
OFF automatically.
OFF : The transceiver's power is not controlled by the optional
command microphone. Even if the command microphone
is turned OFF, the transceiver will continue to work.
--Set Mode--
Radio Power Power
˘ON
OFF
D D Scrambler type
(Appears when a scrambler unit is installed)
When an optional scrambler unit is installed, the scrambler type
can be selected in Set mode depending on dealer setting.
--Set Mode--
Scrambler Scrambler Type
UT-98
˘UT-112
≤
(Default: 400)
≥
(Default: ON)
(Default: UT-112)
D D Scrambler code
(Appears when a scrambler unit is installed)
When an optional scrambler unit is installed, the scrambler
code can be set depending on dealer setting.
When the UT-112 is installed, 32 codes (1 to 32) can be se-
lected.
When the UT-98 is installed, 128 codes (0 to 127) can be se-
lected.
When UT-112 is installed
--Set Mode--
Scrambler Code
4
≤
3
2
˘1
<CLR˘Exit / ENT˘OK>
(Default: 1)
D D Favorite channel
This item sets the Favorite channel function ON or OFF.
The favorite channel is programmed by the TAG channel set-
ting (p. 15).
ON : [Y Y ]/[Z Z ] keys on the microphone select the favorite
channels in the selected channel group in sequence
when pushed.
OFF : [Y Y ]/[Z Z ] keys on the microphone select all channels in
the selected channel group in sequence when pushed.
--Set Mode--
Favorite CH
˘ON
OFF
8
SET MODE
When UT-98 is installed
--Set Mode--
Scrambler Code
3
≤
2
1
˘0
<CLR˘Exit / ENT˘OK>
(Default: 0)
(Default: ON)
8
45