Detaching The Front Panel; Setup Menu; Preparing The Remote Control - Pioneer DEH-X8750BT Owner's Manual

Detaching the front panel

Detach the front panel to prevent theft. Remove any cables and devices attached to the
front panel and turn off the unit before detaching it.
Detach
Important
• Avoid subjecting the front panel to excessive shock.
• Keep the front panel out of direct sunlight and high temperatures.
• Always store the detached front panel in a protective case or bag.

Preparing the remote control

Remove the insulation sheet before use.
How to replace the battery
Insert the CR2025 (3 V) battery with the plus (+) and
minus (–) poles orientated properly.
WARNING
• Keep the battery out of the reach of children. Should the battery be swallowed, consult a doctor
immediately.
• Do not expose the battery or remote control to excessive heat such as direct sunlight or fire.
• There is a potential danger of explosion if the battery is incorrectly replaced. When replacing the
battery, replace it with the same type.
• Do not handle or store the battery with metallic tools or objects.
• If the battery leaks, remove the battery and wipe the remote control completely clean. Then install a
new battery.
Attach
• When disposing of used batteries, compliance with governmental regulations or environmental
institutions' rules that apply in your country/area must be followed that pertain to any special
handling needed for disposal.
• Do not store the remote control in high temperatures or direct sunlight.
• Do not let the remote control fall onto the floor, where it may become jammed under the brake or
accelerator pedal.

Setup menu

When you turn the ignition switch to ON after installation, [Set up :YES] appears in the
display.
1
2
Menu Item
Language select
Calendar
Clock Setting
FM step
AM step
3
CAUTION
Important
Press the M.C. dial.
The setup menu disappears after 30 seconds of no operation. If you prefer not to set
at this time, turn the M.C. dial to select [NO], then press to confirm.
Turn the M.C. dial to select the options, then press to confirm.
To proceed to the next menu option, you need to confirm your selection.
Description
Select the language to display the text information from a
compressed audio file.
[English],
[Español],
[Português]
Set the date.
Set the clock and select the time notation.
Select the FM tuning step from 100 kHz or 50 kHz.
[100kHz],
[50kHz]
Select the AM tuning step from 10 kHz or 9 kHz.
[10kHz], [9kHz]
[Quit :YES] appears when all the settings have been made.
To return to the first item of the setup menu, turn the M.C. dial to select [Quit :NO],
then press to confirm.
5
En