Pioneer DEH-X8750BT Owner's Manual page 19

Cd rds receiver
Hide thumbs Also See for DEH-X8750BT:
Table of Contents

Advertisement

Available languages

Available languages

3
Pull the unit out of the dashboard.
Installing the microphone
(Only for DEH-X8750BT)
The microphone should be placed directly
in front of the driver at a suitable distance
to pick up their voice clearly.
CAUTION
It is extremely dangerous to allow the
microphone lead to become wound
around the steering column or shift lever.
Be sure to install the microphone in such a
way that it will not obstruct driving. It is
recommended to use the clamps (sold
separately) to arrange the lead.
NOTES
• Install the microphone in a position and
orientation that will enable it to pick up
the voice of the person operating the
system.
• Use separately sold clamps to secure the
lead where necessary inside the vehicle.
To install on the sun visor
1
Fit the microphone lead into the
groove.
Microphone
lead
Groove
2
Install the microphone clip on the sun
visor.
Lowering the sun visor reduces the
voice recognition rate.
Microphone clip
To install on the steering
column
1
Slide the microphone base to detach it
from the microphone clip.
Microphone
Microphone clip
Microphone base
2
Install the microphone on the rear side
of the steering column.
Double-sided tape
19
En

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Deh-x7750ui

Table of Contents