Illumination Settings - Pioneer DEH-X8750BT Owner's Manual

Menu Item
AUX
[ON], [OFF]
BT AUDIO
[ON], [OFF]
Clear memory
[Clear memory YES], [Cancel]
BT Version Info.
APP CONNECT MODE*
[Wired], [Bluetooth]
* Not available when [App] is selected as the source.
Description
Set to [ON] when using an auxiliary device
connected to the unit.
Set the Bluetooth signal on/off.
Clear the Bluetooth device data (device list, PIN
code, call history, phone book, preset phone
numbers) stored in the unit.
[Cleared] appears when data is successfully
deleted.
Displays the system version of the unit and the
Bluetooth module.
Select the appropriate connection method
according to your device.

ILLUMINATION settings

Menu Item
Color Setting
[Key Side], [Display Side], [Key &
Display]
Dimmer Setting
[Sync Vehicle Illumi], [Sync Clock],
[ON], [OFF]
Brightness
[1] to [10]
Phone Color
[Flashing]
[Flash FX 1] to [Flash FX 6]
[OFF]
Illumi Effect
[ON], [OFF]
Description
Select color for the keys/display of the unit from
12 preset colors, [Scan] or [Custom]*.
• [Scan]: Cycle through a variety of colors
automatically.
• [Custom]*:
1 Press and hold the M.C. dial until the color
setting display appears.
2 Set the primary color (R (red)/G (green)/B
(blue)) and brightness level ([0] to [60]).
You cannot select a level below 20 for all three
of R (red), G (green), B (blue) at the same time.
You can also customize the preset colors. Select
one of the preset colors, then press and hold the
M.C. dial until the color setting display appears.
* The Custom setting is only available for [Key Side]
and [Display Side].
Change the display brightness.
Change the display brightness.
The available setting ranges differ depending on
[Dimmer Setting].
Select the key color when a call is received.
Applies the color set by [Key Side].
Cycle through a variety of colors automatically.
No change in key color made.
The illumination effect can be seen when;
– there is an incoming call
– you are on the phone
– a CD is inserted/ejected
15
En