Names And Functions Of Controls; Front Panel - Pioneer LaserDisc ELITE CLD-99 Operating Instructions Manual

NAMES AND FUNCTIONS OF CONTROLS
FRONT PANEL
@ POWER STANDBY/ON switch
Press to switch power ON/OFF (STANDBY).
@ STANDBY indicator
This lights to indicate power standby.
When power is switched ON, it goes out.
@ Disc table (P. 7)
@ CD disc table (P. 7)
© DIRECT CD button/indicator (P. 15)
© DISC SIDE A/B button (P. 15)
@ Display window
Stop button (m) (P. 14)
© Play/Pause button (> /11) (P. 14)
Press when power is OFF, and if there is a disc in the table, power
is switched on and play starts.
@ OPEN/CLOSE button (4) (P. 14)
Press when power is OFF, and power is switched ON and the disc
table opens. '
@ FL OFF display button/indicator
When you press the button, the indicator on top of the button lights
and the display window switches OFF. Switching off the display
prevents low level noise from adversely affecting sound quality.
Press again to switch the display ON.
@ FILM MODE button/indicator (P. 19)
Switch ON if desired when watching a movie disc.
When you switch it ON:
@ The display window turns OFF. You can switch it ON/OFF with the
FL OFF display button @.
eScreen display (refer to P. 25 for display indications) switches
OFF.
eWhen changing disc sides, the picture is usually the memorized
picture, but when using the Film mode, the screen is black.
@ Remote control sensor (P. 4)
DISPLAY
@ Side A indicator
@ Function operation indicator
Indicates functions and operations. Refer to function explanations
for details concerning indications.
@® Side B indicator
@ 1/L channel, 2/R channel indicator
Indicates audio output channel.
12
<VRB1139>
En
@® MIN/SEC indicator
Indicates play time in minutes and seconds.
© TOTAL/REMAIN indicator
Indicates remaining play time (REMAIN) and the total play time of
the side (TOTAL).
@ FRAME/TIME indicator
Indicates frame number and elapsed play time.
Chapter/Track indicator
Indicates chapter number and track number.