Troubleshooting - Axis MTC--GM-LP Owner's Manual

TROUBLESHOOTING

PROBLEM
Pilot will not light
Pilot will not stay on
Burner will not light
PROBABLE CAUSE
Gas valve may be OFF
Fuel tank empty
Air in supply system
Loose connection
Debris around pilot
Loose connection
Defective thermocouple
Gas leak in line
Lack of fuel pressure
Pressure is low
Control valve not ON
Thermocouple broken
Pilot light assembly bent or not
in correct location
17
SOLUTION
Turn the gas valve ON
Refill LP gas tank
Purge air from lines
Check all fittings
Clean dirty area
Tighten connection
Contact customer service
Check connections
Fuel tank is near empty
Fuel tank is near empty
Turn valve to ON
Contact customer service
Contact customer service