Connections; Reference Loop; Ltc Timecode I/O; Sdi Input And Outputs - AJA Ki PRO ULTRA Installation & Operation Manual

Connections

Reference Loop

LTC Timecode I/O

SDI Input and Outputs

HDMI Monitor Out

HDMI Input

HDMI formats supported:
Ki Pro Ultra v1.0
• Reference video loop for connection to a stable source of genlock video or sync.
• LTC Input and Output (2x BNC)
• HDMI v2.0 Input
• HDMI v2.0 Monitor Output for monitoring video with embedded audio
• 10/100/1000 Ethernet LAN
• Dual-channel Fiber Inputs 1-4/Outputs 1-4
• HD/3G-SDI Inputs and Outputs 1-4, with 8-channel embedded audio (8x BNC)
• HD-SDI Monitor Output (1 BNC) with embedded audio.
• Balanced 8-channel Analog Audio Input via one DB-25
• Balanced 8-channel Analog Audio Output via one DB-25
• AES EBU 8-channel Audio I/O via one DB-25
• RS-422 DB-9 Machine Control Interface (Sony 9 Pin protocol)
• Dual Mono Analog Audio Output via 2 RCA Connectors
Two looping BNCs allow genlock signal input and output connections. If the genlock
output is unused, it must be terminated using a 75-ohm termination cap. When the
output connects to downstream equipment, the last piece of equipment in the series
must be terminated into 75 ohms.
Two BNCs provide connections to the house LTC timecode generator or source.
Connections are high impedance. One BNC is for input and the other for output.
Eight BNC connectors (four inputs and four outputs) are provided supporting HD/3G-SDI
video and embedded 24-bit digital audio.
One HDMI connector provides for monitor output of HDMI compatible video (version
2.0) and multi-channel embedded audio. HDCP is not supported on the output. The
HDMI output supports standard HDMI cables only.
One HDMI Input connector provides input of HDMI video and multi-channel
embedded audio. HDCP is not supported on the input. The HDMI input supports
standard HDMI cables only.
• 720p 50, 59.94, 60
• 1080i 25, 29.97, 30
• 1080p 23.98, 24, 25, 29.97, 30, 50, 59.94, 60
• 2Kx1080p 23.98, 24, 25, 29.97, 30, 50, 59.94, 60
• Ultra HD (3840x2160p) 23.98, 24, 25, 29.97, 30, 50*, 59.94*, 60*
• 4K (4096x2160p) 23.98, 24, 25, 29.97, 30, 50*, 59.94*, 60*
*For UHD and 4K 50/60 fps, HDMI 2.0 supports 4:2:0
NOTE: When using the Ki Pro Ultra HDMI connection and attaching it to any HDMI audio or video
accessory, you must use a ferrite-beaded HDMI cable, HH-28F-06, between the HDMI output
port of the Ki Pro Ultra and the HDMI accessory to maintain regulatory compliance.
16 www.aja.com