Sub-Zero UC-24BG Installation Manual page 8

INSTALLATION
Installation
WATER LINE (MODEL UC-24CI)
Purge the water line prior to final connection to the unit. This
will remove any debris that may be present in the tubing
from installing the new water line.
For model UC-24CI, connect the plastic tubing from the unit
to the house water supply line with the fitting connection kit
provided. Check all water line fittings for leaks.
Water lines can not be exposed to
IMPORTANT NOTE:
freezing temperatures.
|
8 Sub-Zero Customer Care 800.222.7820
ANCHORING
To anchor, use the optional countertop bracket provided, to
secure the unit to the underside of the countertop. Refer to
the illustration below. If the countertop bracket can not be
utilized, install shims along the top and sides of the unit.
KICKPLATE
Install the kickplate using the two screws provided. Refer
to the illustration below. The kickplate must be removable
for service. The floor cannot interfere with removal. Do not
cover the louvered section of the kickplate.
COUNTERTOP
BRACKET
Anchoring.
KICKPLATE
Kickplate installation.