Page 3
Disassembly and Assembly of Separate Components Guided on both sides with hinge and lid necks. When removing, raise the lid and press the flaps with the lid necks outward. When closing the lid, the paper filter must be put in, raise the lid in upright position and insert the hinge and lid necks in both sides.
Page 4
Control Panel ?, Unlock the control panel, take off the rocker switch, put in the Rocker Switch rocker switch again with mounted-on adjusting spring and lock in the control panel with the compression spring. Rotary Electronic Put in the rotary potentiometer into the device in support part 8. Sliding Electronic Insert the gear wheel symmetrically into the sliding part with the slide potentiometer and apply it in the centre of rack and guide bar...