Technical Data; Definitions: Safety Guidelines; General Power Tool Safety Warnings - DeWalt DWE8830G Manual

En g li sh
anGle GrinderS dWe8830G, dWe8840G
congratulations!
You have chosen a D
e
D WALT one of the most reliable partners for professional power tool users.
e

Technical data

Voltage
Power input
No-load speed
Wheel diameter
Spindle
Net Weight

definitions: Safety Guidelines

The definitions below describe the level of severity
for each signal word. Please read the manual and
pay attention to these symbols.
DANGER: Indicates an imminently
hazardous situation which, if not avoided,
will result in death or serious injury.
WARNING: Indicates a potentially
hazardous situation which, if not
avoided, could result in death or
serious injury.
CAUTION: Indicates a potentially
hazardous situation which, if not
avoided, may result in minor or
moderate injury.
NOTICE: Indicates a practice not
related to personal injury which, if
not avoided, may result in property
damage.
Denotes risk of electric shock.
Denotes risk of fire.
WARNING: To reduce the risk of injury,
read the instruction manual.
4
WALT tool. Years of experience, thorough product development and innovation make
Volt
W
min
-1
mm
kg
DWE8830G
220~240 V
2400 W
8,500
180
M14
5.3

General Power Tool Safety Warnings

WARNING! Read all safety warnings
and all instructions. Failure to follow
the warnings and instructions may result
in electric shock, fire and/or serious
injury.
Save all warningS and inStructionS
for future reference
The term "power tool" in the warnings refers to
your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
1) Work area SafeTy
a) Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power
tools create sparks which may ignite the dust
or fumes.
c) Keep children and bystanders away while
operating a power tool. Distractions can
cause you to lose control.
2) elecTrical SafeTy
a) Power tool plugs must match the outlet.
Never modify the plug in any way. Do
not use any adapter plugs with earthed
(grounded) power tools. Unmodified plugs
and matching outlets will reduce risk of
electric shock.
DWE8840G
220~240 V
2400 W
6,500
230
M14
5.5