What To Do If; Installation - AEG 30006VL User Manual

Hide thumbs Also See for 30006VL:
Table of Contents

Advertisement

Available languages

Available languages

26 www.aeg.com
Inserting the drawer
1.
Set the drawer on the support rails.
Make sure that the catches engage
correctly into the rails.
2.
Lower the drawer until it is horizontal
and push it in.

11. WHAT TO DO IF...

WARNING!
Refer to the Safety chapters.
The residual heat indica-
tor does not come on
The appliance does not
operate
The oven does not heat
up
The oven does not heat
up
The oven lamp does not
operate
Steam and condensation
settle on the food and in
the oven cavity
If you cannot find a solution to the prob-
lem yourself, contact your dealer or the
service centre.
We recommend that you write the data here:
Model (MOD.)
Product number (PNC)
Serial number (S.N.)

12. INSTALLATION

WARNING!
Refer to the Safety chapters.
Problem
Possible cause
The cooking zone is not
hot because it operated
only for a short time
The fuse in the fuse box
is released
The oven is not switched
on
The necessary settings
are not set
The oven lamp is defec-
tive
You left the dish in the
oven for too long
The necessary data for the service centre
is on the rating plate. The rating plate is
on the front frame of the oven cavity.
Height
WARNING!
When the oven is in use, heat can
build up in the drawer. Do not
keep flammable things in there
(e.g. cleaning materials, plastic
bags, oven gloves, paper, clean-
ing sprays, etc.).
Remedy
If the cooking zone must
be hot, speak to the af-
ter sales service
Control the fuse. If the
fuse is released more
than one time, refer to a
qualified electrician.
Switch on the oven
Control the settings
Replace the oven lamp
Do not leave the dishes
in the oven for longer
than 15-20 minutes after
the cooking process
ends
.........................................
.........................................
.........................................
Dimensions
847 - 867 mm

Advertisement

Chapters

Table of Contents
loading

Table of Contents