Cleaning The Lower Paddle; Cleaning The Air Filter For The Ignition Air Compressor - Bixby Energy MaxFire User Manual

Hide thumbs Also See for MaxFire:
Table of Contents

Advertisement

CLEANING THE LOWER PADDLE

The Lower Paddle needs to be cleaned once a month in
order to operate effi ciently. The ash dumping process
causes the holes in the lower paddle to eventually clog
with ash.
1.
Make sure the Room Heater is off and cool.
2.
On the control panel, push the "ON" and then
the "OFF" button immediately to clear the burn
pot and to place the lower paddle in the correct
position for cleaning.
3.
Unplug the Room Heater.
4.
Open the glass door or ash drawer to gain access to
the burn pot.
5.
Looking into the burn pot, insert a 1/8" drill bit,
toothpick, or similar diameter tool into the holes,
clearing each blocked hole.
CLEANING THE AIR FILTER FOR THE IGNITION
AIR COMPRESSOR
The air fi lter for the air compressor will only need to
be cleaned if the Room Heater is installed in a dusty
environment. Inspect fi lter annually. If it appears dirty,
remove and clean with a mild detergent and water. Once
dry, replace.
03/2007
Figure 35
Air Compressor
Air Filter
Air Filter
Figure 36
Page 10
110_Maintenance and Adjusting Procedures
Burn Pot
Holes

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents