No display output
after turning the
Cannot access the
The signal cable is not
connected to the correct
VGA port on your computer.
Signal cable problems
The LAN cable is not
LAN cable problems
Your computer is not
properly connected to a
router or hub.
Problems caused by the anti-
• C onnect the signal cable to the correct
display port (onboard VGA or discrete
• I f you are using a discrete VGA card,
connect the signal cable to the discrete
Try connecting to another monitor.
Connect the LAN cable to your
Ensure the LAN LED is on. If not, try
another LAN cable. If it still does not
work, contact the ASUS service center.
Ensure that your computer is properly
connected to a router or hub.
Contact your Internet Service Provider
(ISP) for the correct LAN settings.
Close the anti-virus software.
Reinstall the LAN driver
Chapter 5: Troubleshooting