Log In To Or Out Of A Conference - 3M Peltor DECT-Com II User Manual

2.3.7 SELECT ANOTHER BASE FROM A PORTABLE UNIT
g In VOLUME MODE on a portable unit in LISTEN MODE; double press on the [M] button to enter BASE SELECTION
MODE.
A voice confirmation "BASE" is given, urging to select a base.
g Press [+] or [–] to cycle through the numbers of available bases and an auto setting
A voice confirmation is given for each available choice: "AUTO", "ONE", "TWO" ...
Stop at your preferred base number (or auto, see below).
g Log on to the base by pressing the [M] button and return to listen only menu items by pressing briefly on the [M] button.
A voice confirmation "LOGIN" followed by "BASE (number), GROUP 1" is given, confirming that the portable unit is
logged on to the base with the given number as a listener in the given group.
If "AUTO" is chosen, the unit will log on to the base with the latest used base or the next available.
Notice: If there is more than one DECT-Com II system within range of each other, the portable units could be pre-
designated to certain bases respectively. Then, if the choice "AUTO", the unit will log on to the first found of the pre-
designated bases.
(For programming DECT-Com II units, a special PC software is needed. Contact your Authorised DECT-Com II Dealer* !)
)

2.4 LOG IN TO OR OUT OF A CONFERENCE

Up to 9 active speakers and additionally more than 40 listeners can be members in a DECT-Com II conference, on the
same base at the same time. They can be subdivided in up to 3 conferences with fewer members in each group.
2.4.1 LOG IN AS A LISTEN-ONLY CONFERENCE MEMBER
A portable unit is initially logged in to a conference as a LISTEN-ONLY member, taking part in the DECT-Com conference
as a listener only.
A voice confirmation "BASE (number), GROUP (number)" with the actual conference number and group is given.
At any time it is possible for a LISTEN-ONLY member to enter as an ACTIVE member in a conference group by pressing a
[PTT#] button. If the conference already consists of the maximum number of members, the first logged in ACTIVE member
is pushed out to be a LISTEN-ONLY member.
2.4.2 LOG IN AS AN ACTIVE CONFERENCE MEMBER
g Double press on [PTT #] to break in to one of the max. three conferences.
A double tone is confirming that you are an active member in the selected conference.
g Press once on the same [PTT #] again to change to LISTEN-ONLY MODE.
A single tone is confirming that you are a listen-only member in the conference.
2.4.3 LOG IN AS A MEMBER IN ANOTHER CONFERENCE GROUP
g Press on another [PTT #] button to become a member in another conference.
A tone is confirming that you are a member in the selected conference.
2.4.4 AUTO TALK
A system for maximum 9 users, using only group 1, can be programmed in a configuration where all the portables always
should be in talk mode.
Automatic talk mode makes it possible to ensure that all the members in the small group always are speakers in the
conference, as soon as they are in range of the base unit.
(For further information; contact your Authorised Peltor DECT-Com II Dealer* .)
)
7