Tire Pressure Monitor Tpm; Resetting The System - BMW 3 SERIES Owner's Manual

Hide thumbs Also See for 3 SERIES:
Table of Contents

Advertisement

Tire Pressure Monitor TPM

The concept
Check the inflation pressure in the four installed
tires. The system notifies you if there is a signif-
icant loss of pressure in one or more tires.
Functional requirement
The system must have been reset while the
inflation pressure was correct; otherwise, reli-
able signaling of a flat tire is not ensured.
Always use wheels with TPM electronics to
ensure that the system will operate properly.
Each time a tire inflation pressure has been cor-
rected or a wheel or tire has been changed,
reset the system.
System limitations
Sudden serious tire damage caused by
external influences cannot be indicated in
advance.<
The system does not function correctly if it has
not been reset. For example, a flat tire may be
indicated even though the tire inflation pres-
sures are correct.
The system is inactive and cannot indicate a flat
tire:
>
When a wheel without TPM electronics is
installed.
>
Interference with TPM by other systems or
devices with the same transmission fre-
quency.

Resetting the system

Each time a tire inflation pressure has been cor-
rected or a wheel or tire has been changed,
reset the system.
For operating principle refer to page 82.
1.
Start the engine, but do not start driving.
2.
Briefly press the button 1 in the turn signal/
high beam lever up or down repeatedly until
Online Edition for Part no. 01 40 2 609 312 - © 08/11 BMW AG
Technology for driving comfort and safety
the corresponding symbol and "RESET"
appear.
3.
Press button 2 to confirm your choice of the
Tire Pressure Monitor. The following dis-
play appears:
4.
Press button 2 for approx. 5 seconds, until
the small warning lamp lights up in yellow
and the following appears in the display:
5.
Start driving.
After several minutes of driving time, the
adjusted inflation pressures will be adopted as
nominal values. The resetting process is com-
pleted automatically as you drive. The indicator
lamp goes out after the system reset is com-
pleted.
Controls
95

Advertisement

Table of Contents
loading

Table of Contents